| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| CONNECTION TYPE | INTERNALLY AND EXTERNALLY THREADED TUBE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| CONNECTION TYPE | UNTHREADED EXTERNAL TUBE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.125 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD OR 1ST LAYER RUBBER IMPREGNATED BRAIDED RAYON CORD AND 2ND LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD OR 2ND LAYER RUBBER IMPREGNATED BRAIDED RAYON CORD AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 0.425 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 22.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.375 INCHES AND 0.625 INCHES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; WITH MOUNTING BRACKET,SECOND END DESIGNED FOR 0.438 IN. DIAMETER FLUID PASSAGE BOLT |
| SPECIFICATION/STANDARD DATA | SAE J1401-81343 NATIONAL STD/SPEC |
| TEMP RATING | -65.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B AND 3A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |