|
|
|
National Stock Number:
5305-01-356-3189
Federal Supply Class:
5305
National Item Identification Number:
013563189
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| LD111-0047-0511 | 06725 | SPS TECHNOLOGIES, LLC | | LD111-0047-0511 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | LD111-0047-0511 | 27624 | SPS TECHNOLOGIES LLC | | LD111-0047-0511 | 43999 | THE BOEING COMPANY | | LD111-0047-0511 | 57928 | SONIC INDUSTRIES, INC. | | LD111-0047-0511 | 73197 | HI-SHEAR CORPORATION | | LD111-0047-0511 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM | | GRIP LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM | | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | HEAD DIAMETER | 0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM | | HEAD STYLE | OVAL COUNTERSUNK | | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ+35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.467 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|