|
|
|
National Stock Number:
5306-01-356-3188
Federal Supply Class:
5306
National Item Identification Number:
013563188
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 03A201-5 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A201-5 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | AIC 4412-4-5 | 06725 | SPS TECHNOLOGIES, LLC | | 111282-5 | 0PTK6 | SPS TECHNOLOGIES INC | | PBF1583-5 | 27624 | SPS TECHNOLOGIES LLC | | 111282-5 | 80539 | SPS TECHNOLOGIES, LLC | | SC3106-4-5 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.613 INCHES MINIMUM AND 0.643 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | HEAD STYLE | DISHED HEXAGON | | LOCKING FEATURE | PATCH THREADS | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE FASTENER | | MATERIAL | PLASTIC POLYETHYLENE LOCKING FEATURETITANIUM ALLOY UNS R56400 FASTENER | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SPECIAL FEATURES | LOCKING ELEMENT PER NAS 1283,TYPE,EXCEPT MAT'L. SHALL BE POLYETHYLNE TEREPHTHATE FROM LONGLOK GARDENA | | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD63.0 MICROINCHES GRIP16.0 MICROINCHES THREADS16.0 MICROINCHES ALL SHOULDERS | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.316 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|