|
|
|
National Stock Number:
5307-00-297-2991
Federal Supply Class:
5307
National Item Identification Number:
002972991
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 3X63409A | 62983 | EATON AEROSPACE, LLC |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.093 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.062 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES STUD THREAD | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | MATERIAL | STEEL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.375 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.375 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.1678/+0.1690 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|