|
|
|
National Stock Number:
5307-00-297-2994
Federal Supply Class:
5307
National Item Identification Number:
002972994
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| TX94180-34 | 59875 | EATON CORP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 3135 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6330 ASSN STD SINGLE MATERIAL RESPONSE | | OVERALL LENGTH | 0.969 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | UNF STUD THREAD | | NOMINAL THREAD SIZE | 0.190 INCHES NUT THREAD | | 0.190 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 32 NUT THREAD | | 32 STUD THREAD | | THREAD PITCH DIAMETERS | 0.1719 TO 0.1732 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.422 INCHES MINIMUM NUT THREAD | | 0.406 INCHES MAXIMUM STUD THREAD | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.190 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.060 INCHES NOMINAL FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59875 | | DESIGN CONTROL REFERENCE | TX94180-34 |
|
|