|
|
|
National Stock Number:
5310-00-936-0444
Federal Supply Class:
5310
National Item Identification Number:
009360444
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 767901-2 | 04577 | MISSION SYSTEMS ORCHARD PARK INC | | 767901-2 | 31441 | AMERICAN SAFETY FLIGHT SYSTEMS INC | | 767901-2 | 62323 | CONAX FLORIDA CORPORATION | | 8148650 | 98748 | AIR FORCE UNITED STATES DEPARTMENT OF THE DBA TINKER AFB OC ALC DSP |
|
Techincal Specification:
| MATERIAL | STEEL COMP 301 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | CENTER HOLE SHAPE STYLE | ROUND | | HOLE DIAMETER | 0.239 INCHES MINIMUM AND | | 0.242 INCHES MAXIMUM | | PERIPHERAL SHAPE STYLE | ROUND | | OVERALL DIAMETER | 0.700 INCHES NOMINAL | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | THICKNESS | 0.016 INCHES NOMINAL | | HEAT TREATMENT | HALF HARD | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 04577 | | DESIGN CONTROL REFERENCE | 767901-2 |
|
|