|
|
|
National Stock Number:
5310-00-936-0445
Federal Supply Class:
5310
National Item Identification Number:
009360445
Description:
WASHER,FLAT
Detail:
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
|
Manufacturer Information:
| 767901-3 | 04577 | MISSION SYSTEMS ORCHARD PARK INC | | 767901-3 | 31441 | AMERICAN SAFETY FLIGHT SYSTEMS INC | | 767901-3 | 62323 | CONAX FLORIDA CORPORATION | | 8148650 | 98748 | AIR FORCE UNITED STATES DEPARTMENT OF THE DBA TINKER AFB OC ALC DSP |
|
Techincal Specification:
| CENTER HOLE SHAPE STYLE | ROUND | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | HEAT TREATMENT | COLD DRAWN 1/2 HARD CONDITION | | HOLE DIAMETER | 0.239 INCHES MINIMUM AND 0.242 INCHES MAXIMUM | | OVERALL DIAMETER | 0.700 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 301 OVERALL | | PERIPHERAL SHAPE STYLE | ROUND | | SURFACE TREATMENT | PASSIVATE OVERALL | | THICKNESS | 0.025 INCHES NOMINAL |
|
|