|
|
|
National Stock Number:
5315-00-576-1725
Federal Supply Class:
5315
National Item Identification Number:
005761725
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 69725-3D44 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.435 INCHES NOMINAL | | DIAMETER | 0.0932 INCHES MINIMUM AND | | 0.0937 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 440C OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 53.0 ROCKWELL C MINIMUM AND | | 58.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND | | 17.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.208 INCHES MINIMUM AND | | 0.228 INCHES MAXIMUM | | HEIGHT | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.033 INCHES MINIMUM AND | | 0.038 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.064 INCHES MINIMUM AND | | 0.084 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 69725-3D44 |
|
|