|
|
|
National Stock Number:
5315-00-576-1726
Federal Supply Class:
5315
National Item Identification Number:
005761726
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 69725-4C42 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.406 INCHES NOMINAL | | DIAMETER | 0.1244 INCHES MINIMUM AND | | 0.1249 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 410 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND | | 46.0 ROCKWELL C MAXIMUM OVERALL | | CHAMFER LENGTH | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 13.0 DEGREES MINIMUM AND | | 17.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | HEIGHT | 0.037 INCHES MINIMUM AND | | 0.057 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.081 INCHES MINIMUM AND | | 0.101 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 69725-4C42 |
|
|