|
|
|
National Stock Number:
5315-00-619-8820
Federal Supply Class:
5315
National Item Identification Number:
006198820
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 9089384 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4620 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 1,2 OR 3 FED SPEC ALL TREATMENT RESPONSES OVERALL | | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.105 INCHES MINIMUM AND | | 0.109 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.105 INCHES MINIMUM AND | | 0.109 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.130 INCHES MINIMUM AND | | 0.170 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.770 INCHES MINIMUM AND | | 1.790 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.060 INCHES MINIMUM AND | | 2.100 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3745 INCHES MINIMUM AND | | 0.3750 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED |
|
|