|
|
|
National Stock Number:
5315-00-619-8821
Federal Supply Class:
5315
National Item Identification Number:
006198821
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 9089385 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4620 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 COND B1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 60.0 ROCKWELL C MINIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.105 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.105 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.130 INCHES MINIMUM AND | | 0.170 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.600 INCHES MINIMUM AND | | 2.640 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.900 INCHES MINIMUM AND | | 2.940 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3745 INCHES MINIMUM AND | | 0.3750 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | SPECIAL FEATURES | OPTIONAL CENTER DRILLED 0.183 TO 0.203 IN. DIA BOTH END |
|
|