| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| FEATURES PROVIDED | CASEHARDENED |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| HARDNESS RATING | 60.0 ROCKWELL C NOMINAL OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| OVERALL LENGTH | 2.620 INCHES MINIMUM AND 2.660 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4620 OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| SHANK DIAMETER | 0.305 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| SHANK LENGTH | 0.400 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SPECIAL FEATURES | TWO 0.105 TO 0.109 IN. DIA HOLES 1.48 TO 1.52 IN. CENTER TO CENTER DISTANCE BETWEEN HOLES |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 63.0 MICROINCHES SHOULDER END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |