| FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 47.9 MILLIMETERS MINIMUM AND 48.1 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 24.9 MILLIMETERS MINIMUM AND 25.1 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE DIAMETER | 7.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 8.5 MILLIMETERS NOMINAL |
| FIRST LEG END WIDTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG THICKNESS | 2.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 65.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | DIN 6930,ST1203 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 39.9 MAJOR MILS AND 40.1 MAJOR CENTIMETERS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 47.9 MILLIMETERS MINIMUM AND 48.1 MILLIMETERS MAXIMUM |
| SECOND LEG END WIDTH | 45.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 5.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 10.0 MILLIMETERS MINIMUM |
| SECOND LEG LENGTH | 80.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 2.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 65.0 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | ANGLE |