|
|
|
National Stock Number:
5365-01-313-0316
Federal Supply Class:
5365
National Item Identification Number:
013130316
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 3C3306P05 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| APERTURE DIAMETER | 21.375 INCHES MINIMUM AND 21.385 INCHES MAXIMUM | | FIRST BOLT CIRCLE DIAMETER | 27.980 INCHES NOMINAL | | LARGEST BOLT HOLE DIAMETER | 0.656 INCHES NOMINAL | | LARGEST BOLT HOLE QUANTITY | 3 | | MATERIAL | STEEL COMP 4140 | | OUTSIDE DIAMETER | 30.495 INCHES MINIMUM AND 30.505 INCHES MAXIMUM | | SECOND BOLT CIRCLE DIAMETER | 29.250 INCHES NOMINAL | | SMALLEST BOLT HOLE DIAMETER | 0.344 INCHES NOMINAL | | SMALLEST BOLT HOLE QUANTITY | 16 | | SPECIAL FEATURES | LARGE BOLT HOLES EQUALLY SPACED; SMALL BOLT HOLES UNEQUALLY SPACED |
|
|