|
|
|
National Stock Number:
5365-01-274-8629
Federal Supply Class:
5365
National Item Identification Number:
012748629
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| P815-5A | 0B201 | CLARK AND ASSOCIATES INC | | P815-5A | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| BEARING SURFACE WIDTH | 0.400 INCHES MINIMUM AND 0.460 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.800 INCHES MINIMUM AND 0.860 INCHES MAXIMUM | | CONSTRUCTION | ONE-PIECE | | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | OVERALL LENGTH | 1.420 INCHES MINIMUM AND 1.480 INCHES MAXIMUM | | OVERALL THICKNESS | 0.006 INCHES MINIMUM AND 0.010 INCHES MAXIMUM | | OVERALL WIDTH | 0.830 INCHES MINIMUM AND 0.890 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | SPECIAL FEATURES | ONE HOLE 0.240 IN. MIN AND 0.260 IN. MAX ON ONE END AND ONE HOLE 0.302 IN. MIN AND 0.322 IN. MAX ON OPPOSITE END; TAB 0.190 IN. MIN AND 0.210 IN. MAX ALONG LENGTH AND 0.830 IN. MIN AND 0.890 IN. MAX ALONG WIDTH WITH 0.06 IN. BEND,30 DEGREE RADIUS | | STYLE DESIGNATOR | RECTANGULAR | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|