|
|
|
National Stock Number:
5365-01-274-8630
Federal Supply Class:
5365
National Item Identification Number:
012748630
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 7031504-03 | 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
|
Techincal Specification:
| STYLE DESIGNATOR | RECTANGULAR | | CONSTRUCTION | LAMINATED | | OVERALL LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM | | OVERALL WIDTH | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM | | LAMINATION QUANTITY | 10 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/1 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 5052 | | SPECIAL FEATURES | HAS CIRCULAR APERTURE W/DIA. OF 0.808 IN. MIN. AND 0.818 IN. MAX.,LOCATED 1.060 IN. PORM 0.010 IN. FROM CENTER OF APERTURE TO TOP OF SHIM AND 0.690 IN. PORM 0.010 IN. FROM CENTER OF APERTURE TO BOTTOM OF SHIM,CENTRALLY LOCATED ALONG LENGTH; SQUARED CUT OUT AT TOP OF SHIM CENTERED ALONG LENGTH 1.440 IN. PORM 0.010 IN. AND 0.220 IN. PORM 0.010 IN. DEEP; NOTCH IN CENTER OF CUT OUT W/RADIUS OF 0.06 |
|
|