|
|
|
National Stock Number:
5365-01-277-5392
Federal Supply Class:
5365
National Item Identification Number:
012775392
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 68A112170-2012 | 28444 | BR MACHINE PARTS INC | | 68A112170-2012 | 64620 | VENEDY TOOL AND MACHINE CO | | 68A112170-2012 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.240 INCHES MINIMUM AND 0.300 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | HOLE DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM | | OVERALL LENGTH | 2.020 INCHES MINIMUM AND 2.080 INCHES MAXIMUM | | OVERALL WIDTH | 0.510 INCHES MINIMUM AND 0.570 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,T81 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SPECIAL FEATURES | DISTANCE FROM LEFT EDGE TO NEAREST BOLT HOLE CENTER IS 0.650 IN. ALONG LENGTH AND DISTANCE FROM RIGHT EDGE TO NEAREST BOLT HOLE CENTER IS 0.400 IN. ALONG LENGTH; LEFT SIDE IS ROUNDED TO A THICKNESS OF 0.020 IN. |
|
|