|
|
|
National Stock Number:
5365-01-277-5393
Federal Supply Class:
5365
National Item Identification Number:
012775393
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 68A112170-2013 | 64620 | VENEDY TOOL AND MACHINE CO | | 68A112170-2013 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOLT HOLE QUANTITY | 2 | | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.290 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | HOLE DIAMETER | 0.406 INCHES MINIMUM AND 0.413 INCHES MAXIMUM | | OVERALL LENGTH | 2.390 INCHES MINIMUM AND 2.450 INCHES MAXIMUM | | OVERALL WIDTH | 0.610 INCHES MINIMUM AND 0.670 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4,T81 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 2024 | | SPECIAL FEATURES | LEFT SPACER; DISTANCE FROM RIGHT EDGE TO NEAREST BOLT HOLE CENTER ALONG LENGTH-0.450 IN. AND DISTANCE FROM LEFT EDGE TO NEAREST BOLT HOLE CENTER ALONG LENGTH-1.170 IN.; BOTH SIDES CHAMFERED TO THICKNESS OF 0.040 IN. |
|
|