|
|
|
National Stock Number:
5905-00-929-8824
Federal Supply Class:
5905
National Item Identification Number:
009298824
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 176FTS105 | 08815 | HONEYWELL INTERNATIONAL INC | | 2557877-1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | MK8-9525 | 04454 | SENSOR SYSTEMS, L.L.C. | | MKB9525 | 04454 | SENSOR SYSTEMS, L.L.C. |
|
Techincal Specification:
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BODY DIAMETER | 1.449 INCHES NOMINAL | | BODY LENGTH | 0.925 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 348.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS ALL SECTIONS | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 ALL SECTIONS | | PILOT DIAMETER | 1.31225 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.00150 INCHES | | MAXIMUM STARTING TORQUE | 0.70 INCH-OUNCES | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | OVERALL DIAMETER | 1.684 INCHES NOMINAL | | OVERALL LENGTH | 1.456 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.7 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 2 | | SHAFT LENGTH | 0.531 INCHES NOMINAL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT END PLAY | 0.00500 INCHES | | SHAFT RADIAL PLAY | 0.002 INCHES | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SPECIAL FEATURES | 1000 OHM WIPER SERIES RESISTOR CONNECTED INTERNALLY IN EACH SECTION | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0 TO 400.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 TURRET | | TEST DATA DOCUMENT | 10001-2557877 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.312 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
|
|