| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM |
| BODY LENGTH | 1.900 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 340.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS 1ST SECTION AND 10.000 KILOHMS 2ND SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS |
| LATERAL RUNOUT | 0.002 INCHES |
| PILOT DIAMETER | 1.31200 INCHES MINIMUM AND 1.31250 INCHES MAXIMUM |
| PILOT LENGTH | 0.06200 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.80 INCH-OUNCES |
| MOUNTING LIP DEPTH | 0.09300 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 1.43200 INCHES MINIMUM AND 1.44200 INCHES MAXIMUM |
| MOUNTING METHOD | CLAMP RING |
| OVERALL DIAMETER | 1.716 INCHES MINIMUM AND 1.721 INCHES MAXIMUM |
| OVERALL LENGTH | 2.541 INCHES MINIMUM AND 2.603 INCHES MAXIMUM |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SECTION QUANTITY | 2 |
| SHAFT LENGTH | 0.641 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.187 INCHES NOMINAL |
| SHAFT END PLAY | 0.00600 INCHES |
| SHAFT RADIAL PLAY | 0.002 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT STYLE | ROUND |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.281 INCHES NOMINAL |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 3 TURRET |
| TEST DATA DOCUMENT | 10001-2557878 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNDERCUT DIAMETER | 1.312 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.07300 INCHES NOMINAL |