6105-01-127-1834 MOTOR,ALTERNATING CURRENT Index 5905-01-127-1838 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-01-127-1837

Federal Supply Class:
5905

National Item Identification Number:
011271837

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
1289004454SENSOR SYSTEMS, L.L.C.
48482904454SENSOR SYSTEMS, L.L.C.
FCP-118H-1503929CARTER MANUFACTURING CORPORATION
78FLI-18908815HONEYWELL INTERNATIONAL INC
48482989305SIMMONDS PRECISION PRODUCTS INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION360.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION6.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPEDOUBLE ENDED SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER0.840 INCHES MINIMUM AND 0.850 INCHES MAXIMUM
BODY LENGTH0.625 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
FEATURES PROVIDEDHUMIDITY PROOF
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 SINGLE SECTION
LATERAL RUNOUT0.002 INCHES
MAXIMUM RUNNING TORQUE0.27 INCH-OUNCES
MAXIMUM STARTING TORQUE0.27 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
SHAFT BEARING TYPEBALL
SHAFT LENGTH1.559 INCHES MINIMUM AND 1.621 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT END PLAY0.005 INCHES
SHAFT STYLEROUND, STEPPED
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION336.0 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS150.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY4 TURRET
TEST DATA DOCUMENT89305-484829 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT DIAMETER0.781 INCHES MAXIMUM
UNDERCUT LENGTH0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us