5905-01-127-1837 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-01-127-1839 RESISTOR,FIXED,FILM

National Stock Number:
5905-01-127-1838

Federal Supply Class:
5905

National Item Identification Number:
011271838

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
48483004454SENSOR SYSTEMS, L.L.C.
48483008815HONEYWELL INTERNATIONAL INC
78FLI-190-0108815HONEYWELL INTERNATIONAL INC
48483089305SIMMONDS PRECISION PRODUCTS INC


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION351.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION6.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
ACTUATOR TYPEDOUBLE ENDED SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
BODY DIAMETER0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM
BODY LENGTH0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
BODY STYLECYLINDRICAL SERVO MOUNTED
CUBIC MEASURE0.221 CUBIC INCHES
FEATURES PROVIDEDHUMIDITY PROOF
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
FRAGILITY FACTORMODERATELY RUGGED
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 SINGLE SECTION
LATERAL RUNOUT0.002 INCHES
MAXIMUM RUNNING TORQUE0.27 INCH-OUNCES
MAXIMUM STARTING TORQUE0.27 INCH-OUNCES
MOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
MOUNTING LIP DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
MOUNTING METHODCLAMP RING
PILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
PILOT DIAMETER RUNOUT0.001 INCHES
PILOT DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.1245 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM
SHAFT LENGTH1.559 INCHES MINIMUM AND 1.621 INCHES MAXIMUM
SHAFT RADIAL PLAY0.001 INCHES
SHAFT RUNOUT0.001 INCHES
SHAFT END PLAY0.005 INCHES
SHAFT STYLEROUND
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION336.0 SINGLE SECTION
TERMINAL LOCATIONFRONT END
TERMINAL LENGTH0.125 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY4 TURRET
TEST DATA DOCUMENT89305-484830 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
UNDERCUT DIAMETER0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
UNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us