| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 305.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 5.580 KILOHMS SINGLE SECTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY DIAMETER | 0.937 INCHES NOMINAL |
| BODY LENGTH | 1.297 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL HOLE/SLOT MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION TABLE |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15 TO 0.15 SINGLE SECTION |
| LATERAL RUNOUT | 0.002 INCHES |
| MAXIMUM STARTING TORQUE | 0.50 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING METHOD | THREADED HOLE |
| PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 345.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.073 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 64.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.1242 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| SHAFT BEARING TYPE | BALL |
| SHAFT LENGTH | 0.270 INCHES NOMINAL |
| SHAFT END PLAY | 0.00500 INCHES |
| SHAFT STYLE | ROUND |
| SHAFT RADIAL PLAY | 0.001 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SPECIAL FEATURES | GEAR ASSY PART N0. 458288-001 ASSEMBLED ON BACK END OF VARIABLE RESISTOR |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 150.0 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -10.0 TO 10.0 OHMS SINGLE SECTION |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| TEST DATA DOCUMENT | 89305-485289-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |