5905-01-150-4460 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5930-01-150-4462 SWITCH,ELECTRICAL

National Stock Number:
5905-01-150-4461

Federal Supply Class:
5905

National Item Identification Number:
011504461

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see REHOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
485289-00389305SIMMONDS PRECISION PRODUCTS INC


Techincal Specification:
SECTION QUANTITY1
ELECTRICAL RESISTANCE PER SECTION5.580 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTIONSINGLE SECTION ABSOLUTE LINEARITY
FUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION TABLE
FUNCTION CONFORMITY TOLERANCE PER SECTION-0.15 TO 0.15 SINGLE SECTION
SHAFT RUNOUT0.001 INCHES
LATERAL RUNOUT0.002 INCHES
PILOT DIAMETER RUNOUT0.00100 INCHES
SHAFT RADIAL PLAY0.001 INCHES
SHAFT BEARING TYPEBALL
SHAFT END PLAY0.00500 INCHES
MAXIMUM STARTING TORQUE0.27 INCH-OUNCES
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
FIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION315.0 SINGLE SECTION
TAP LOCATION TOLERANCE PER SECTION-1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION
BODY STYLECYLINDRICAL HOLE/SLOT MOUNTED
BODY DIAMETER0.937 INCHES NOMINAL
BODY LENGTH1.297 INCHES NOMINAL
MOUNTING HOLE/STUD CIRCLE DIAMETER0.562 INCHES NOMINAL
ACTUATOR TYPESINGLE SHAFT
SHAFT STYLEROUND
SHAFT DIAMETER0.1242 INCHES MINIMUM AND
0.1248 INCHES MAXIMUM
SHAFT LENGTH0.330 INCHES NOMINAL
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG324.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURESTOPS
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION315.0 NOMINAL
MOUNTING METHODTHREADED HOLE
MOUNTING FACILITY QUANTITY2
SCREW THREAD SERIES DESIGNATORUNC
SCREW THREAD DIAMETER0.073 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH28.0
TERMINAL TYPE AND QUANTITY4 WIRE LEAD
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
RELIABILITY INDICATORNOT ESTABLISHED
TEST DATA DOCUMENT89305-485289 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
FRAGILITY FACTORMODERATELY RUGGED


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us