| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| BODY LENGTH | 0.313 INCHES NOMINAL |
| BODY STYLE | PISTON |
| CAPACITANCE RANGE IN PICOFARADS | +0.8 TO 10.0 SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.219 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.281 INCHES NOMINAL |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 1000.0 GIGOHMS |
| OVERALL DIAMETER | 0.281 INCHES NOMINAL |
| OVERALL LENGTH | 0.485 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 TERMINAL |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 250.0 DC CONTINUOUS SINGLE SECTION |
| QUALITY FACTOR AT 25 DEG CELSIUS | 2000.0 |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TERMINAL DIAMETER | 0.031 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 3 PRINTED CIRCUIT |
| TEST DATA DOCUMENT | 00724-11-00273-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |