| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SLOTTED SCREW |
| ADJUSTMENT DEVICE TORQUE | 1.000 INCH-OUNCES MINIMUM AND 5.000 INCH-OUNCES MAXIMUM |
| BODY LENGTH | 0.296 INCHES NOMINAL |
| BODY STYLE | PISTON |
| BUSHING DIAMETER | 0.234 INCHES NOMINAL |
| BUSHING LENGTH | 0.203 INCHES NOMINAL |
| BUSHING SHAPE | ROUND |
| CAPACITANCE RANGE IN PICOFARADS | +0.8 TO 10.0 SINGLE SECTION |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 1000.0 GIGOHMS |
| OVERALL DIAMETER | 0.275 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| OVERALL LENGTH | 0.499 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNS |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING |
| NOMINAL THREAD SIZE | 0.234 INCHES |
| NONDERATED OPERATING TEMP | -65.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 250.0 DC CONTINUOUS SINGLE SECTION |
| QUALITY FACTOR AT 25 DEG CELSIUS | 5000.0 |
| TEMP COEFFICIENT OF CAPACITANCE IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.109 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 1 TURRET |
| TEST DATA DOCUMENT | 00724-11-00273-002 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2A |
| THREAD QUANTITY PER INCH | 64 |
| TOLERANCE OF TEMP COEFFICIENT IN PPM PER DEG CELSIUS | -15.0 TO 15.0 SINGLE SECTION |
| TUNING CHARACTERISTIC | STRAIGHT LINE CAPACITY SINGLE SECTION |