5925-01-311-0588, CIRCUIT BREAKER

5935-01-311-0587 SOCKET,PLUG-IN ELECTRONIC COMPON

National Stock Number:
5925-01-311-0588

Federal Supply Class:
5925

National Item Identification Number:
013110588

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

APG-66-1-61-203-C-90	81541	SENSATA TECHNOLOGIES MARYLAND, INC
JA2S-T3-BS-01-D-L-20-3	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV

Techincal Specification:

POLE QUANTITY	2
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	20.0 AMPERES AC ALL LOCATIONS
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	4 TAB W/SCREW
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	277.0 AC ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
RESET METHOD	MANUAL
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED HOLE
CASE MATERIAL	PLASTIC
TRIP RELEASE METHOD	MAGNETIC ALL LOCATIONS
FREQUENCY IN HERTZ	50.0 OR
	60.0 ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	5000.0 AC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.130 MINIMUM AT 200 PCT AND
	3.000 MAXIMUM AT 200 PCT ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE
BODY LENGTH	1.968 INCHES MINIMUM AND
	2.032 INCHES MAXIMUM
BODY WIDTH	1.180 INCHES MINIMUM AND
	1.532 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.528 INCHES MINIMUM AND
	1.592 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.718 INCHES MINIMUM AND
	0.782 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	1.628 INCHES MINIMUM AND
	1.692 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.718 INCHES MINIMUM AND
	0.782 INCHES MAXIMUM
BOSS HEIGHT	0.098 INCHES MINIMUM AND
	0.162 INCHES MAXIMUM
MOUNTING SURFACE TO TERMINAL END DISTANCE	1.898 INCHES MINIMUM AND
	1.962 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD SIZE	0.138 INCHES
THREAD QUANTITY PER INCH	32
THREAD PITCH DIAMETERS	0.1177 TO 0.1214 INCHES
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	FUNGUS RESISTANT AND
	MOISTURE RESISTANT AND
	SALT SPRAY PROOF
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
FRAGILITY FACTOR	MODERATELY RUGGED
SPECIAL FEATURES	WHITE HANDLE WITHOUT MARKINGS

Click here to Register for Free 30-day Trial