5925-01-311-0589, CIRCUIT BREAKER

National Stock Number:
5925-01-311-0589

Federal Supply Class:
5925

National Item Identification Number:
013110589

Description:
CIRCUIT BREAKER

Detail:
A DEVICE WITH MEANS OTHER THAN FUSES FOR AUTOMATICALLY OPENING THE CIRCUIT IN WHICH IT IS INSTALLED WHEN THE CURRENT VARIES FROM THE PREDETERMINED VALUE FOR WHICH THE DEVICE IS SET. MAY INCLUDE PROVISIONS FOR MANUAL OPERATION. AT LEAST ONE SET OF CONTACTS MUST BE IN SERIES WITH THE ACTUATING ELEMENT(S). A COMBINATION OF SEMICONDUCTOR AND PASSIVE DEVICES MAY BE USED IN LIEU OF CONTACTS. FOR AUTOMATICALLY OPERATED ITEMS IN WHICH THE ACTUATING (TRIPPING) ELEMENT AND CONTACTS ARE NOT IN SERIES, SEE RELAY (AS MODIFIED). FOR ITEMS WHICH ARE OPERATED BOTH MANUALLY AND AUTOMATICALLY BUT THE ACTUATING ELEMENTS AND CONTACT ARE NOT IN SERIES, SEE RELAY-SWITCH. EXCLUDES CIRCUIT BREAKER BOX AND MAGNETO "BREAKER" ASSEMBLIES. SEE ALSO SWITCH (AS MODIFIED); AND CONTROLLER.

Manufacturer Information:

APG-66-1-61-153-C-90	81541	SENSATA TECHNOLOGIES MARYLAND, INC
JA2S-T3-BS-01-D-L-15-3	74193	EATON CORP HEINEMANN PRODUCTS COMMERCIAL CONTROLS DIV

Techincal Specification:

BODY LENGTH	1.995 INCHES MINIMUM AND
	2.005 INCHES MAXIMUM
BODY WIDTH	1.515 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.529 INCHES MINIMUM AND
	1.591 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH	0.745 INCHES MINIMUM AND
	0.755 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	1.655 INCHES MINIMUM AND
	1.665 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.745 INCHES MINIMUM AND
	0.755 INCHES MAXIMUM
BOSS HEIGHT	0.125 INCHES MINIMUM AND
	0.135 INCHES MAXIMUM
MOUNTING SURFACE TO TERMINAL END DISTANCE	2.000 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNC
NOMINAL THREAD SIZE	0.138 INCHES
THREAD QUANTITY PER INCH	32
MANUAL ACTUATOR TYPE AND QUANTITY	1 TOGGLE
ACTUATOR FUNCTION	TRIP-RESET
ACTUATOR POSITION DESIGNATION	AT POLE ONE
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED	DUSTPROOF
ARC QUENCHING METHOD	MAGNETIC BLOWOUT
STORAGE TYPE	GENERAL PURPOSE WAREHOUSE
FRAGILITY FACTOR	MODERATELY RUGGED
POLE QUANTITY	2
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE	15.0 AMPERES AC ALL LOCATIONS
CIRCUIT PROTECTION TYPE	OVERCURRENT ALL LOCATIONS
TERMINAL TYPE AND QUANTITY	4 SCREW
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS	240.0 AC ALL LOCATIONS
TRIP RELEASE CHARACTERISTIC	TIME DELAY ALL LOCATIONS
RESET METHOD	MANUAL
BODY STYLE	MULTIPOLE-SINGLE ACTUATOR TYPE
MOUNTING FACILITY TYPE AND QUANTITY	4 THREADED HOLE
CASE MATERIAL	PLASTIC
TRIP RELEASE METHOD	MAGNETIC-HYDRAULIC ALL LOCATIONS
FREQUENCY IN HERTZ	50.0 OR
	60.0 ALL LOCATIONS
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS	1000.0 AC ALL LOCATIONS
INTERNAL TRIP RELEASE CONFIGURATION	SERIES TRIP ALL LOCATIONS
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT	0.130 MINIMUM AT 200 PCT AND
	3.000 MAXIMUM AT 200 PCT ALL LOCATIONS
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT	125.0 ALL LOCATIONS
MAIN CONTACT TRIPPING MECHANISM TYPE	TRIP FREE

Click here to Register for Free 30-day Trial