| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 12.0 MILLIMETERS NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AS SUPPLIED |
| COLOR | BLACK |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH/ |
| DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | 20.0 MILLIMETERS NOMINAL AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | 32.0 MILLIMETERS NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| FLEXIBILITY | SEMIRIGID |
| HEAT SHRINKAGE RATING IN PERCENT | 50.0 |
| HEIGHT | 27.2 MILLIMETERS NOMINAL AFTER UNRESTRICTED RECOVERY |
| LARGE END WALL THICKNESS OF MAIN BODY | 1.5 MILLIMETERS NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 14.2 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 28.5 MILLIMETERS MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 28.5 MILLIMETERS MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 6.6 MILLIMETERS MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MATERIAL DOCUMENT AND CLASSIFICATION | RT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| MATERIAL | PLASTIC POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| SMALL END WALL THICKNESS OF MAIN BODY | 0.8 MILLIMETERS NOMINAL AFTER UNRESTRICTED RECOVERY |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| TEMP RATING | 121.0 CELSIUS |