| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -4.0 TO 4.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND A |
| BODY SIZE | 8 |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7530 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.5700 INCHES MINIMUM AND 2.6300 INCHES MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 26.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| PILOT LENGTH | 0.0380 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 7.500 INPUT TO OUTPUT NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 6900.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 750.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1230.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 81.000 NOMINAL |
| SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| STATOR INPUT CURRENT RATING | 9.0 AMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 17.0 WATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 11.8 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 326.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 1300.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 1550.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 250.00 NOMINAL |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO | 2.203 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |