| AFT OF FIRST FLANGE DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| BODY DIAMETER | 1.9900 INCHES MAXIMUM |
| BODY STYLE | STANDARD ROUND D |
| BODY SIZE | 23 |
| FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2500 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -2.5 TO 2.5 |
| LENGTH | 0.2520 INCHES NOMINAL SHOULDER |
| OVERALL LENGTH | 4.7870 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING BODY |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 5.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 10.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.9230 INCHES MINIMUM AND 3.9380 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 0.933 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0580 INCHES MAXIMUM |
| PILOT DIAMETER | 0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 59.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 617.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 30.00 NOMINAL |
| SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| SHAFT DIAMETER | 0.2402 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.6930 INCHES MINIMUM AND 0.7190 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 11.0 MILLIWATTS MAXIMUM |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.0 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 11.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 16.0 MILLIAMPERES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 37.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 41.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.1 NOMINAL |
| TRANSFORMATION RATIO | 0.990 ROTOR TO STATOR NOMINAL |