| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 60.0 MILLIAMPERES MINIMUM AND |
| 85.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 780.0 MILLIWATTS MINIMUM AND |
| 1200.0 MILLIWATTS MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 TAB W/SCREW |
| BODY SIZE | 15 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO RESISTANCE IN OHMS | 170.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 1480.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 106.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 744.00 NOMINAL |
| TRANSFORMATION RATIO | 0.783 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.05 INCH-OUNCES MAXIMUM |
| BODY STYLE | STANDARD ROUND B |
| SHOULDER DIAMETER | 1.3120 INCHES NOMINAL |
| PILOT DIAMETER | 0.8750 INCHES NOMINAL |
| OVERALL LENGTH | 2.3120 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.4370 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7720 INCHES NOMINAL |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHAFT DIAMETER | 0.1872 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.5550 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES MAX |
| SHAFT MAXIMUM RADIAL PLAY | 0.0004 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 5.0 OUNCES |
| SHAFT END PLAY | 0.0013 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 5.0 OUNCES |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| FRAGILITY FACTOR | MODERATELY RUGGED |