| OVERALL LENGTH | 22.563 INCHES |
| OVERALL WIDTH | 9.750 INCHES |
| OVERALL HEIGHT | 11.812 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 4.250 INCHES FIRST END |
| 6.625 INCHES SECOND END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| INCLOSURE FEATURE | DRIPPROOF-15 DEG |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.500 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 8.000 INCHES |
| INCLOSURE SPECIFICATION | NEMA |
| FRAME SIZE DESIGNATION | 203 |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 1.5000 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 50.0 OPERATING DEG CELSIUS AND |
| 60.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 SOLDER LUG |
| ROTOR SPEED RATING IN RPM | 3460.0 SINGLE FULL LOAD |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 81349-MIL-M-1940 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | SERVICE A TYPE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILM1940TYPESERVICEA |