| OVERALL LENGTH | 17.813 INCHES |
| OVERALL WIDTH | 9.750 INCHES |
| OVERALL HEIGHT | 11.812 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 6.188 INCHES SINGLE END |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| INCLOSURE FEATURE | DRIPPROOF-15 DEG |
| SHAFT CENTER TO MOUNTING SURFACE DISTANCE | 5.000 INCHES SINGLE END |
| MOUNTING METHOD | FIXED BASE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.500 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 8.000 INCHES |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| FRAME SIZE DESIGNATION | 203 |
| FREQUENCY IN HERTZ | 60.0 INPUT |
| PHASE | THREE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 440.0 LINE TO NEUTRAL SINGLE INPUT |
| POWER RATING | 1.5000 HORSEPOWER OUTPUT |
| WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| DUTY CYCLE | CONTINUOUS |
| TEMP RATING | 40.0 OPERATING DEG CELSIUS AND |
| 70.0 AMBIENT DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| TERMINAL TYPE AND QUANTITY | 3 SCREW |
| SHAFT ROTATION DIRECTION | CLOCKWISE OR |
| COUNTERCLOCKWISE SINGLE END |
| ROTOR SPEED RATING IN RPM | 3535.0 SINGLE FULL LOAD |
| SHAFT END CHARACTERISTIC | A2 FIRST STYLE AND |
| A9 SECOND STYLE AND |
| A12 THIRD STYLE SINGLE END |
| THREAD LENGTH | 0.5620 INCHES NOMINAL SINGLE END |
| STEP DIAMETER | 0.7500 INCHES NOMINAL SINGLE END |
| STEP LENGTH | 4.1880 INCHES NOMINAL SINGLE END |
| KEYWAY WIDTH | 0.1880 INCHES NOMINAL SINGLE END |
| KEYWAY DEPTH | 0.0940 INCHES NOMINAL SINGLE END |
| SHAFT DIAMETER | 0.750 INCHES MINIMUM AND |
| 1.063 INCHES MAXIMUM SINGLE END |
| KEYWAY LENGTH | 1.2190 INCHES NOMINAL SINGLE END |
| THREAD SERIES DESIGNATOR | UNF SINGLE END |
| NOMINAL THREAD SIZE | 0.500 INCHES SINGLE END |
| FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 81349-MIL-M-1940 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| NONDEFINITIVE SPEC/STD DATA | SERVICE A TYPE |
| SHAFT END STYLE | STEPPED AND |
| EXTERNAL THREADED AND |
| FLAT KEYWAY SINGLE END |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILM1940TYPESERVICEA |